Dust Collection Systems and Down Draft Tables - Click to Jump to Down Draft Tables

EUROPAC EP-765  3/4HP


Interested in More Information?

EUROPAC EP-790  3/4HP

Interested in More Information?
Model EP-765 EP-790
Motor(HP) 3/4 HP 3/4 HP
Air Capacity(CFM) 750 750
Static pressure(In H2O) 6.2 6.2
Fan 9" 9"
Noise(dB) 52-62 52~62

Diameter of hose connections

main inlet 100mm (4") 100mm (4")
100mm(4") inlet 100mm(4") x 1 100mm(4") × 1
Net weight(kg) 23.5 25
Gross weight(kg) 25 28
Overall dimensions(mm)(LWH) 720x380x1370 800×420×1550
Packing size(mm)(LWH) 725x410x435 666×470×466

EUROPAC EP-701  2HP

EUROPAC EP-701L  1½HP

Model EP-701 EP-701L  
Motor(HP) 2 HP 1½HP  
Air Capacity(CFM) 1600 CFM 1250 CFM  
Static pressure(In H2O) 14.5 7.8
Fan 12" 11"
Noise(dB) 67~77 dB 67~77 dB

Diameter of hose connections

main inlet 125mm (5") 125mm (5")
100mm(4") inlet 100mm(4") x 2 100mm(4") x 2
Net weight(kg) 56 45
Gross weight(kg) 61 48
Packing size 92 × 58 × 58 cm 92 x 58 x 58 cm

EUROPAC CT-22SDC  2HP/ CT-23SDC  3HP

Excellent for separating heavy particles from the fine particles before going through the impeller and drops them into the steel or plastic 55-gallon drum. With the cyclone effect fitting onto a standard drum can there is no longer a need to dump the chips and dust from the collection bag to a disposable bag.

A drum dolly is included for easy mobility. 55 gallon drums not included.

Simply set the drum can on the curb with the lid to be emptied.  The fine particles are trapped by the filter bag and fall into the disposable plastic bag for easy clean-up.

Interested in More Information?

EUROPAC CT-25SDC  5HP/3phase

    Model

CT-22SDC

CT-23SDC

CT-25SDC

Motor

2HP

3HP

5HP/3phase

Blower Wheel / Fan

12" ( 305mm )

12" ( 305mm )

14-1/4"  

Air Flow Capacity (CFM)

1500 CFM

2200 CFM

3500 CFM

Static Pressure (inch of water)

12

12

16

Sound Rating@1 meter (3.3ft)

78 dB

85 dB

80 dB

Inlet and Outlet Connection

Outlet: 7"
Inlet:   4" x 2

Outlet: 8"
Inlet:    4" x 3

Outlet: 10"
Inlet:    4" x 4 

Bag Diameter

19-5/8" (500mm)

19-5/8" (500mm)

23-5/8" (600mm)

Filter Bag Length (1 micron)

2240mm

2240mm

2510mm

Plastic Bag Length

1030mm

1030mm

1030mm

Collector Plastic Bag Capacity

42 gallon

42 gallon

42 gallon

Machine Size (L x W x H)

1650x900x3080 mm

1650x900x3080 mm

1800x1250x3425 mm

Packing Size (L x W x H)

1090x660x1040 mm

1090x660x1040 mm

1360x1250x850 mm

Net / Gross Weight

85 kgs / 103kg

93 kgs / 115 kgs

134 kgs / 184 kgs

Cuft

27’

27’

52’


    Model

EUROPAC CT-27SDC

EUROPAC CT-210SDC

Motor

7½HP/3phase

10HP/3phase

Blower Wheel / Fan

14-3/4"  

16”

Air Flow Capacity (CFM)

4800 CFM

9800 

Static Pressure (inch of water)

16

11

Sound Rating@1 meter (3.3ft)

80 dB

83 dB

Inlet and Outlet Connection

Outlet: 8" x 2
Inlet:    4" x 5 

Outlet: 10” x 2
Inlet:    5" x 5

Bag Diameter

23-5/8" (600mm)

23-5/8" (600mm)

Number of Drum

1

2

Filter Bag Length (1 micron)

2510mm

2510 mm

Plastic Bag Length

1030mm

1030 mm

Collector Plastic Bag Capacity

42 gallon

42 gallon

Machine Size (L x W x H) 2800 x 1800 x 3540 mm 2800 x 2500 x 4110 mm

Packing Size (L x W x H)

1520 x 1270 x 1050 mm

 

Net / Gross Weight

200 kgs / 263 kgs

 

Cuft

72’

 


Down Draft Tables

DENRAY - ALL MODELS Down Draft Tables


No need to wear dust-masks when finish sanding; self contained and available in 1 or 3 phase.

Interested in More Information?
Model 3648-SD
The model 3648-SD "Sit Down" is perfect for small shops, accommodating situations where setting is preferred. Complete with pushbutton cleaning, this model comes with 80/20 cartridge filter that cleans at 99.95% capture rate at 0.5 micron.

Size: 36" x 48" With Casters
Height & Weight:
34" & 517 lbs
Motor:
1 ½ Hp, 1 or 2 Ph
Voltage:
115 & 220, 1 Ph or 230/460 & 575, 3Ph
CFM:
2400
Sound Level:
65 Decibels

Options:
Explosion Proof Motor "3-Ph only", Light Bars, Auto-Timer, Muffler Carbon Filter Bank "odor only", HEPA Filter Bank, Magnehelic Gauge and Three sided 20" high Safety Shield


Tube Filtration Systems & Cartridge Filtration Systems

Model Motor/HP CFM Table Size Casters Sound Level
2800 1 ½ 2800 28 x 48 Standard 70 Dcb.
2872 2 3400 28 x 72 Standard 77 Dcb.
2896 2 3500 28 x 96 Standard 78 Dcb.
3660 2 3400 36 x 60 Standard 77 Dcb.
3672 2 3500 36 x 72 Standard 78 Dcb.
3696 2 3800 36 x 96 Standard 78 Dcb.
4800 2 3400 48 x 48 Standard 77 Dcb.
7200 2 3800 48 x 72 Standard 78 Dcb.
9600 3 4300 48 x 96 Standard 81 Dcb.

Model 2634-B,
3444-B-Super & 3648-SD

Model 2634-B is perfect for small shops, and easily rolls through a 36" or larger door on four swivel casters. The filter is 175 square feet of 80/20 media that cleans at 0.5 micron with a 99.95% efficiency. Cleaning is done by removing the filter from the filter rod. Then, raise the filter an inch or so, tap downward while rotating the filter, and knock the dirt from the filter into the drawer below. A 7" woodworking vise, casters, tilt out on the front for edge sanding, and rubber coated top are all standard features.

Size and Work Surface: 34" x 44"
Downdraft Surface:
26" x 34"
Height & Weight:
34" x 375 lbs
Motor:
¾ Hp, 1-Ph
Voltage:
115 & 220, 1-Ph  *Receptacle Only With 115 Volt
CFM: 1500
Sound Level:
60 Decibels

The model 3444-B-Super is similar to the 3444-B, but contains a larger fan and motor and has our typical rails and tops that are found on our larger tables. There are no intake dust ports or vise due to these modifications. This model comes equipped with an 80/20 cartridge filter that cleans with a 99.95% capture rate at 0.5 micron.

Size: 34" x 44"
Height & Weight:
 36" & 510 lbs
Motor:
1 ½ Hp, 1 or 3 Ph
Voltage:
 115 & 220, 1 Ph or 230 & 575, 3 Ph
CFM:
 3000
Sound Level:
70 Decibels

Options: Explosion Proof Motor "3-Ph only", Light Bars, Auto-Timer, Muffler Carbon Filter Bank "odor only", HEPA Filter Bank, Magnehelic Gauge and Three sided 20" high Safety Shield

Interested in More Information?

Model Motor/HP CFM Table Size Casters Sound Level

   Denray Machines Cartridge Filter System is the best on the market. Denray’s "Jet Pulse" pushbutton cleaning line comes in various dimensions to accommodate any job size. These tables all come with 80/20 cartridge filters which clean with a 99.95% capture rate at 0.5 micron.  The dust is captured and collected in the filter. The "Jet Pulse" push button cleaning system sends a burst of air from the air tank to purge the cartridge filter.

   Pushbutton Cleaning tables have air tanks built inside to be filled with the shops compressed air. At the push of a button, the complete contents of the tank are instantly dumped inside the filters. With that large amount of air, the dust is pushed off the filter and settles into the dust drawer below for cleaning (emptying) as needed. When working on a downdraft table, smaller pieces will always give you the best results, where the part you are working on will cover no more than 75% of the tables surface. If more than 75% of the surface is covered, raise the part up to allow the negative air created by the table to go under the part; that will create a much higher air flow.

Optional Features On All Models: Explosion Proof Motors (3 phase only), Light Bars, Exhaust Mufflers, Magnehelic Gauges, Filter Cleaning Auto-Timer, HEPA Filter Banks, Carbon Filter Banks, 3-Sided 20" Shields

Interested in More Information?

2634-B ¾ 1500 34 x 34 Standard 65 Dcb.
3444-B 1 1800 34 x 44 Standard 60 Dcb.
3444-B Super 11/2 3000 34 x 44 Standard 70 Dcb.
3648-SD 1 1/2 2400 36 x 48 Standard 65 Dcb.
2872-B 2 3000 28 x 72 $100 72 Dcb.
3672-B 2 3400 36 x 72 $100 84 Dcb.
4800-B 2 3000 48 x 48 Standard 77 Dcb.
7200-B 5 3900 48 x 72 $100 78 Dcb.
9600-B 5 4800 48 x 96 $200 82 Dcb.
3696-SS 5 4800 36 x 96 Standard 78 Dcb.
4896-LP 5 4800 48 x 96 $200 82 Dcb.

ProductsThe Lines We CarryEquipment Currently AvailableContacting FC Machinery Ltd.