Sanders - Edge Sanders, Belt Sanders, Disc Sanders, Drum Sanders.

The Progress PMC-150 Model 6" X 40" edge sander

It features a spring loaded belt pulley enabling worn belts to be replaced quickly and efficiently, as well as ensuring the correct belt tension at all times.

Specifications:

FLOOR SPACE

22" X 60"

PLATEN LENGTH

40"

SANDING BELT

6" X 108"

ELECTRICAL EQUIPMENT

Magnetic starter (overload protection),
adjustable beds and a full tracking unit
2 H.P. T.E.F.C. motor, 1750 rpm
3 phase motor 220 - 440 - 550 volts
Abrasive belt speed: 3400 ft/min

WEIGHT

Approximate Shipping Weight: 600 lbs.

Optional features

MOTOR

Single phase, 2 H.P. 220 Volts











Interested in More Information?

The Progress PMC-152 Model  6" X 60" edge sander



Interested in More Information?

It features a spring loaded belt pulley enabling worn belts to be replaced quickly and efficiently, as well as ensuring the correct belt tension at all times. It also includes a rubber covered drive pulley for better grip.

Specifications

FLOOR SPACE

22" X 80"

PLATEN LENGTH

60"

SANDING BELT

6" X 158"

ELECTRICAL EQUIPMENT

Magnetic starter (overload protection),
adjustable beds and a full tracking unit
3 H.P. T.E.F.C. motor, 1750 rpm
3 phase 220 - 440 - 550 volts

Abrasive belt speed: 3800 ft/min

WEIGHT

Approximate Shipping Weight: 730 lbs.

Optional features

MOTOR

Single phase, 3 H.P. 220 Volts

Specifications

TABLE SIZE

25" wide X 48" long

VERTICAL ADJUSTMENT

24"

FLOOR SPACE

59,5" X 91"

ABRASIVE BELT

6" X 158"

TRAVELING BAR Included

BELT GUARDS

Included

ELECTRICAL EQUIPMENT

Magnetic starter
3 H.P. T.E.F.C. motor, 1750 rpm
3 phase 220 - 440 - 550 volts
Pulleys: 8" dia. X 6" face
Rubber covered drive pulley
Abrasive belt speed: 3780 ft/min

WEIGHT

Approximate Shipping Weight: 1000 lbs.

Optional features

MOTOR

Single phase, 2 H.P. 220 volts

The Progress PMC-158-5 Model STROKE SANDER

A low cost, manually operated, 48 inch sanding and polishing machine.  Built around a fully welded structure, for a long lasting durability, it features dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys with sealed ball bearings.



Interested in More Information?

The Progress PMC-264-6 Model STROKE SANDER



Interested in More Information?

A low cost, manually operated, 100 inch sanding and polishing machine.  Built around a fully welded structure, for a long lasting durability, it features dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys with sealed ball bearings.

Specifications

TABLE SIZE

30" wide X 100" long

VERTICAL ADJUSTMENT

24"

FLOOR SPACE

63,5" X 143"

ABRASIVE BELT

6" X 264"

TRAVELLING BAR Included
BELT GUARDS Included

ELECTRICAL EQUIPMENT

5 H.P. T.E.F.C. motor, 1750 rpm
3 phase 220 - 440 - 550 volts
Pulleys: 10" dia. X 6,25" face
Rubber covered drive pulley
Abrasive belt speed: 4750 ft/min

WEIGHT

Approximate Shipping Weight: 1550 lbs.

Optional features

MOTOR

Single phase, 5 H.P. 220 volts

A low cost, manually operated, 144 inch sanding and polishing machine.  Built around a fully welded structure, for a long lasting durability, it features dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys with sealed ball bearings.

Specifications

TABLE SIZE

30" wide X 144" long

VERTICAL ADJUSTMENT

24"

FLOOR SPACE

192,5" X 63,5"

ABRASIVE BELT

6" X 360"

TRAVELLING BAR Included
BELT GUARDS Included

ELECTRICAL EQUIPMENT

Magnetic starter
7.5 H.P. T.E.F.C. motor, 1750 rpm
3 phase 220 - 440 - 550 volts
Pulleys: 10" dia. X 6,25" face
Rubber covered drive pulley
Abrasive belt speed: 4750 ft/min

WEIGHT

Approximate Shipping Weight: 2150 lbs.

Optional features

MOTOR Single phase, 5 H.P. 220 volts
The Progress PMC-360 Model STROKE SANDER / POLISHER



Interested in More Information?

The Progress Model P-6-60 and P-6-48 belt sanders



Perfectly suited for sanding wood, metal or plastics, in custom and production sanding applications.

Interested in More Information?

 P-6-60 Specifications

POSITION

Horizontal / Vertical Combined

BELT SIZE

6" X 60"

BELT SPEED

3400 F.P.M.

PLATEN

6" X 16"

CONTACT WHEEL

6" WIDE, 7" O.D.

ELECTRICAL EQUIPMENT

Magnetic Starter
2 H.P. T.E.F.C motor 1750 rpm
3 phase 220 - 440 - 550 volts

WEIGHT Approximate Shipping Weight: 400 lbs.

Optional features

MOTOR

Single phase, 2 H.P. 220 volts

 P-6-48 Specifications

POSITION

Horizontal / Vertical Combined

BELT SIZE

6" X 48"

BELT SPEED

3400 F.P.M.

PLATEN

6" X 16"

CONTACT WHEEL

6" WIDE, 7" O.D.

ELECTRICAL EQUIPMENT

Magnetic Starter
1 H.P. T.E.F.C motor, 1750 rpm
3 phase 220 - 440 - 550 volts

WEIGHT Approximate Shipping Weight: 360 lbs.

The Progress Model P-12-60 disc and belt sander
Interested in More Information?

The Progress Model P-202-1 Pneumatic Drums and Drum Sanding Machines
Interested in More Information?

An extremely versatile combination machine including a disc and a belt sanding unit.  It is perfectly suited for sanding wood, metal or plastics, in custom and production sanding applications.

Specifications

CONSTRUCTION

All-welded

SANDING BELT

6" X 60"

DIAMETER OF SANDING DISC

12"

TILTING TABLE

8" X 12"

BELT POSITION

Horizontal only, with belt guard

ELECTRICAL EQUIPMENT

Magnetic starter
2 H.P. T.E.F.C. motor, 1750 rpm
3 phase 220 - 440 - 550 volts

WEIGHT

Approximate Shipping Weight: 450 lbs.

Optional features

MOTOR

Single phase, 2 H.P. 220 volts

They are used throughout the woodworking and metal industries where curved, contour holes and flat work can be sanded. By inflating air into drums, the desired Durometer hardness, for any job, is obtainable.

Specifications

ELECTRICAL EQUIPMENT

1 H.P. 3 phase, 1750 rpm, 220 - 440 - 550 volts

SHAFT

34" long X 1,25" diameter

3 SIDED STAND

Included

PNEUMATIC DRUMS

Not included

WEIGHT Approximate Shipping Weight: 400 lbs.

Delta Industrial Model 31-396 Oscillating Edge Sander
  Quick release belt tensioning for easier belt changing
  Idle roller can be used for edge sanding of irregular shapes.
Front cast-iron sanding table can be moved up and down, forward and backward.
Head that can go from 0 degrees to 90 degrees with indent stops at 0, 45 and 90 degrees.
Spindle sanding kit with 3 sizes of drums and collars for contour sanding.
Sanding platen can tilt from 0 degrees to 90 degrees or any angle in between.
Powered by a 3 HP, 220V single phase motor.

Overall Dimensions

Height: 47 3/4"
Width: 27 1/2"
Length: 60 5/8"
Weight: 500 lbs.

Interested in More Information?

Platen Tilting
0 - 90 Degrees
Table Adjustment
Up: 3 1/2"
Forward: 4 3/4"
Oscillating Distance
3/4"
Dust Collection Chute
4"
Sanding Drums
Diameter: 1 1/2", 2", 3"
Long: 4 1/2"
Motor
Single Phase, 3HP, 220V, 1720 RPM
Belt Size
6" x 108"
Disc Diameter
N/A
Belt Speed
3150 FPM
Front Table Size
35 3/8" x 12"
Auxiliary Table Size
11 3/8" x 8 7/8"

1HP, 120V induction motor; 80-grit abrasive belt, 80-grit abrasive disc, stand, tilting table, back-stop, T-handle wrench and instruction manual. For wood only















Interested in More Information?

Delta Industrial Model 31-695 6" Belt/9" Disc Sander
Motor
1 HP
Belt Size
6" x 48"
Disc Diameter
9"
MOTOR
1 HP
SPEED
Belt: 2200 SFPM (671 SMPM)
Disc: 2800 rpm
ABRASIVE BELT
Length: 48"(1219 mm)
Width: 6"(152 mm)
DISC DIAMETER
9"
TABLE SIZE AND TILT
Belt: 6" X 9"(152 X 229 mm) Tilts 45 up and down
Disc: 13" X 16"(330 X 406 mm) Tilts 45 up and down
OVERALL DIMENSIONS
Belt in Vertical Position
Depth: 21"(533 mm)
Length: 31"(787 mm)
Height: 58"(1473 mm)
Belt in Horizontal Position
Depth: 21"(533 mm)
Length: 31"(787 mm)
WEIGHT
79 lbs.(36 kg)
Delta Industrial Model 31-735A 6" Belt/12" Disc Finishing Machine

Delta 6" Abrasive Belt Finishing Machine and the Delta 12" Abrasive Disc Finishing Machine with integrated dust collection and integrated mobile base are comprised in one compact, efficient combination.
Handles 90 to 95% of all your finishing operations.
4" dust port can be used with 5 micron bag provided or can be attached to a standard 4" dust collection system.
Integrated mobile base for ease of mobility.
Powered by a heavy-duty, 1 1/2 HP, TEFC motor.
Offers the right speeds-2100 rpm for disc unit and 3030 fpm for the belt unit-making it well suited for both metal and wood shops.
Belt operates at any angle-vertically, horizontally or any degree in between.
Power take-off spindle for mounting pneumatic sanding drums, abrasive flap wheels, buffing wheels, flexshaft and other accessories to handle a wide variety of extra jobs.
Large tables are scientifically ribbed to prevent distortion.
Belt table tilt up to 45 degrees out and 20 degrees in, disc table tilts 45 degrees out for angle finishing operations.
Special sliding pivot pine incorporated in the disc sander table facilitates circle sanding up to 24" diameter and a full 48" with accessory table extension.

Interested in More Information?

ProductsThe Lines We CarryEquipment Currently AvailableContacting FC Machinery Ltd.