FS Tool – FC Machinery

FS Tool Glue Line Rip Blade 12″ 36 Tooth – 30mm Bore

Verda — Sat, 19 Aug 2023 19:10:56 +0000

Glue line Rip Blade 12″ 30mm bore 36 teeth

Design:

Tooth configuration: TCG
Cutting material: TC
Expansion slots: Cu plugged

Applications:

For glue line ripping dry soft and hardwoods
Extra smooth cut for gluing applications

FS Tool XL4000 Standard Cross Cut Blade 300mm 72 Tooth – 30mm Bore and 2 pinholes

Verda — Sat, 19 Aug 2023 18:57:31 +0000

XL4000 Extended Life These blades set the industry standard for performance. Precision-ground, corrosion resistant tips and custom-tensioned saw bodies greatly increase run times, reducing downtime and associated costs.

Design:

Tooth configuration: TCG
Cutting material: TC XL4000
Expansion slots: Cu plugged

Applications:

For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
For Felder or Format 4 saws.

Item#	Diameter	Kerf	Plate	Bore	Teeth
S23302-30PH	300mm	3.4mm	2.4mm	30mm	72

FS Tool 120mm Industrial Split Scoring Blade

Verda — Sat, 19 Aug 2023 18:56:42 +0000

Industrial Series These premium quality industrial blades are the result of over 30 years of experience and know-how. The best materials, quality testing and high-volume manufacturing together deliver an excellent value, quality blade.

Design:

Tooth configuration: Flat Top
Cutting material: TC
Two piece unit adjustable to the kerf of the main saw blade

Application:

For pre-scoring in plastic laminated sheets
On table saws, sliding table saws, and panel sizing saws with controllable pre-scoring units

Item#	Diameter	Kerf	Plate	Bore	Teeth
52812001-50	120 mm	2.8/3.6 mm	2.0 mm	50 mm	24 (2 x 12)

FS Tool Fine 8″ Dado Set 40 Tooth – 5/8″ Bore

Verda — Sat, 19 Aug 2023 18:55:14 +0000

Design:

Standard set consists of two 40 tooth outside saws blades 1/8″ kerf, one 1/4″ chipper, two 1/8″ chippers and one 1/16″ chipper.
Cutting material: Tungsten Carbide.
Hook angle: 0?

Applications:

To cut grooves and dados in soft and hardwoods, plywood and veneered panels.
Groove widths adjustable from 1/4″ to 13/16″ maximum width in 1/16″ increments. Wider grooves can be obtained by adding spare chippers.
On table saws, sliding table saws and single or double end tenoners

Item#	Diameter	Maximum Width	Bore	Teeth
54DL08	8″	13/16″	5/8″	40

FS Tool XL4000 Melamine Blade 10″ 80 Tooth – 5/8″ Bore

Verda — Sat, 19 Aug 2023 18:54:00 +0000

Design:

Tooth configuration: High ATB (30?)
Cutting material: TC XL4000
Expansion slots: Cu plugged

Applications:

For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
For fine cross cuts in solid woods
On table saws, sliding table saws, vertical panel sizing saws and cut-off saws

Item#	Diameter	Kerf	Plate	Bore	Teeth
SM6251	10″	.118″	.087″	5/8″	80

FS Tool Standard Cross Cut Saw Blade 300mm 72 Tooth – 30mm Bore and 2 pin holes

Verda — Fri, 18 Aug 2023 13:59:15 +0000

Design:

Tooth configuration: TCG
Cutting material: TC
Expansion slots: Cu plugged

Applications:

For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
For Felder or Format 4 saws.

Item#	Diameter	Kerf	Plate	Bore	Teeth
L23302-30PH	300mm	3.4mm	2.4mm	30mm	72

FS Tool Disposable Diamond Router bit 1/2″

Verda — Fri, 18 Aug 2023 13:49:47 +0000

Excellent surface finish and exceptionally long run-time are provided by the Microfinish erosion process of each PCD diamond cutting edge
Excellent chipflow and low heat retention is provided by the staggered 1+1 tooth configuration
Carbide Plunge Point provides clean entry cuts

Cut Diameter = 1/2 in
Cut Length = 1 in
Shank = 1/2 in
Upcut Length = 0.375″
Teeth = 1+1
Overall Length = 3 3/8 in

FS Tool 10″ combo blade

Verda — Tue, 08 Aug 2023 16:20:12 +0000

Product Details

10″ Combination blade 5/8″ bore, 50 teeth DESIGN

● Tooth configuration: 4 ATB & 1 Raker

● Cutting material: TC

● Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip-flow

APPLICATION:

● For cross cutting and ripping soft and hardwoods, plywood and particleboard

● On table saws, sliding table saws and cut-off saws